APPLICATION
CSA approved for use in hazardous locations, the intrinsically safe ultrasonic point liquid level switch provides high or low liquid level detection of chemical, solvent or low viscosity petroleum based liquids with a 1A relay output. Media examples include hydrochloric acid, acetone and diesel fuel oil. The submersible PP or PFA level switch sensor is universally mounted through the tank wall or inside the tank, and connected to a PLC or relay controller.
FEATURES
- CSA approved intrinsically safe for use in hazardous environments
- Submersible PP or PFA Teflon® sensor and cable for corrosive liquids
- 60VA SPST relay selectable NO or NC via power supply wiring polarity
- Compatible with Smart Trak and Switch-Pak installation fittings
PRICING
| P/N | Description | From |
|---|---|---|
| LU10-1305 | PP, short, 3/4″ NPT | $330.00 |
| LU10-1325 | PP, short, 3/4″ G | $350.00 |
| LU10-1405 | PP, long, 3/4″ NPT | $350.00 |
| LU10-1425 | PP, long, 3/4″ G | $370.00 |
| LU10-2305 | PFA, short, 3/4″ NPT | $490.00 |
| LU10-2325 | PFA, short, 3/4″ G | $530.00 |
| LU10-2405 | PFA, long, 3/4″ NPT | $530.00 |
| LU10-2425 | PFA, long, 3/4″ G | $570.00 |
WEBCAL SOFTWARE
Sensors and PodView indirectly, are configurable via our free WebCal PC software and one Fob USB adapter. Sensors are offered with and without Fobs. Fobs are universal and can be used to configure any WebCal compatible product. Download your free copy of WebCal in English or Chinese.
DOCUMENTATION
SPECIFICATIONS
Orientation: Universal
Accuracy: ± 1mm in water
Repeatibility: ± 0.5mm in water
Supply voltage: 12-36 VDC
Consumption: 25 mA maximum
Contact type: (1) SPST relay
Contact rating: GP: 60 VA, IS: 32 VDC @ 0.5A
Contact output: Selectable NO / NC
Process temp.: F: -40° to 176°, C: -40° to 80°
Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C
Sensor rating: -1XX5: NEMA 6 (IP68), -2XX5: NEMA 4X (IP65)
Sensor material: -1XX5: PP, -2XX5: PFA
Cable jack. mat.: -1XX5: PP, -2XX5: PFA
Cable type: 4-conductor, shielded, #22 AWG
Cable length: 10’ (3m)
Process mount: 3/4” NPT (3/4”” G / Rp)
Mount. gasket: Viton®
Classification: Intrinsically safe
Certificate: CSA, LR 79326
Compliance: CE
Approvals: Class I, Groups A, B, C & D; Class II, Groups E, F & G; Class III
Parameters: Vmax = 32V, Imax = 300 mA, Pmax = 1.3W, Ci = 0 µF, Li = 0 µH
PRODUCT SELECTION
If you want help in selecting a sensor for your application, please submit a Level Questionnaire. An engineer will review your requirements and suggest a product solution via email.
